Most budget switches fail in the same predictable ways. You pull a stock switch out of the box, and what you get is a scratchy downstroke, an inconsistent spring ping, and a thocky bottom-out that wakes the whole household. Lubed linears solve all three problems in one pass: the factory pre-lube smooths the stem travel, the linear profile eliminates any tactile bump, and the silent dampers eat the impact noise. That is why this category matters to anyone who types for a living or who shares a desk space.
What separates a genuinely good lubed linear from a mediocre one is how well the damping and lubrication hold up over millions of actuations. Cheap options start out feeling acceptable, but within weeks the lube migrates, the dampers compress unevenly, and you are back to a rattly, inconsistent feel. The switches and boards below all avoid that pitfall to varying degrees. The ordering reflects how well each product delivers on the specific brief of quiet, smooth, linear typing.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
Our Top Picks
Top 3 picks at a glance
Quick Picks
| Product | Best for | Price |
|---|---|---|
| DarkBeacon Blade87 TKL | Complete quiet hot-swap board | Check on Amazon |
| Cherry MX2A Silent Red | Silent linears from the MX originator | Check on Amazon |
| Kailh Box Silent Pink | Very light silent linear with an IP56 box stem | Check on Amazon |
| TTC Frozen Silent V2 | Light silent linears for RGB boards | Check on Amazon |
| Gateron Creamy Silent | Large pre-lubed pack for TKL builds | Check on Amazon |
| Redragon K689 | Hot-swap flexibility at entry price | Check on Amazon |
| Gateron KS-9 Silent 2.0 Red | Pre-lubed 45gf silent linears | Check on Amazon |
| EPOMAKER Nude Rosa | Purpose-built linear silent switches | Check on Amazon |
How We Compared
We evaluated each option on four criteria. First, noise floor during sustained typing — how quiet the product actually is compared to a standard mechanical board. Second, linear consistency — whether the downstroke and upstroke feel smooth and identical across every switch or whether you encounter factory defects. Third, out-of-box readiness — how much work you must do before the product reaches its intended feel, including whether pre-lube is genuinely present. Fourth, compatibility and ecosystem — whether the product works with your existing boards, keycaps, and layout preferences without adapter hassle.
The 8 Best Lubed Linear Switches For Quiet Typing in 2026
DarkBeacon Blade87 TKL
This is a full hot-swap TKL board that ships with silent switches pre-installed, so you get a quiet typing experience without doing any work. The gasket mount absorbs bottom-out impact, and the 8000Hz polling rate makes it viable for gaming too. It is ideal for anyone who wants a turnkey solution at an aggressive price.
- Pro: Gasket structure combined with silent switches produces one of the quietest boards in this list.
- Pro: Hot-swap sockets let you replace the factory silents with your preferred lubed linears later.
- Con: The pre-installed switches use basic factory lube, so enthusiasts may still want to swap or re-lube them for the smoothest feel.
Skip this if you want a full-size layout or need wireless connectivity.
Cherry MX2A Silent Red
Cherry’s MX2A Silent Red is the updated version of the switch that defined the silent linear category. It keeps the familiar 45cN actuation force, about 1.9mm of pre-travel and 3.7mm of total travel, while the MX2A revision adds factory lubrication and a redesigned spring for a smoother, more consistent stroke. This 36-piece kit uses 5-pin housings, so it seats firmly in hot-swap boards.
- Pro: Linear stroke and built-in dampening from the brand that created the MX standard.
- Pro: 5-pin housing and RGB-friendly design suit most hot-swap boards.
- Con: Only 36 switches per kit, so a full board takes several kits.
Skip these if you want a very light spring; 45cN feels firmer than the 35gf to 40gf options here.
Kailh Box Silent Pink
Kailh’s Box Silent Pink wraps a silent linear stem in Kailh’s box structure, which reduces wobble and gives the switch an IP56 dust and water resistance rating. The spring is very light at 35gf, so keystrokes take almost no effort, and dampening keeps the bottom-out quiet. This pack contains 30 3-pin switches that also fit 5-pin hot-swap sockets.
- Pro: Box stem design keeps wobble low and adds IP56 protection against dust and spills.
- Pro: Very light 35gf spring suits long typing sessions with minimal finger fatigue.
- Con: Not marketed as factory-lubed, and the light spring is easy to trigger by accident.
Skip this if you rest your fingers heavily on the keys or want a lubed switch straight out of the pack.
TTC Frozen Silent V2
The TTC Frozen Silent V2 is a crystal-clear silent linear that TTC rates at about 39gf of operating force, with 2.0mm of pre-travel and 3.5mm of total travel. It is factory lubed, uses a dust-proof stem and a double silencing design, and is rated for 50 million keystrokes. The transparent housing makes it a natural fit for RGB boards.
- Pro: Light, smooth stroke with factory lube and double dampening.
- Pro: Transparent housing lets per-key RGB lighting shine through.
- Con: This pack has only 30 switches, so a full board needs several packs.
Skip this if you want a firmer, more deliberate keystroke.
Gateron Creamy Silent
Gateron’s Creamy Silent is a pre-lubed, 5-pin silent linear with a 45gf operating force and a standard MX-style stem. This listing comes in a 90-piece pack, enough for a TKL or 75% board in a single purchase, which also keeps every switch from the same batch.
- Pro: 90 switches per pack covers most compact and TKL layouts at once.
- Pro: Medium 45gf spring balances light typing with control.
- Con: Sold through third-party sellers, so check the listing details before ordering.
Skip this if you need 104 or more switches from a single pack for a full-size board.
Redragon K689
A hot-swap gaming keyboard with extra media keys and an open layout. The real draw is that its hot-swap sockets let you drop in any compatible lubed linear silent switch, including options further down this list. That modularity makes it a strong chassis choice if you want a board you can evolve.
- Pro: Hot-swap sockets are south-facing and MX-compatible, so third-party lubed silents seat without issue.
- Pro: Four extra hotkeys keep common controls under thumb access during long writing sessions.
- Con: Stock switches are not silent linears, so you must buy a separate switch pack to reach the quiet typing goal.
Skip this if you want to buy a complete board that is quiet immediately without a modding session.
Gateron KS-9 Silent 2.0 Red
The KS-9 Silent 2.0 Red is Gateron’s updated silent red: a 5-pin silent linear at about 45gf, with 2.0mm of pre-travel, up to 4.0mm of total travel, and silent pads above and below the stem. Unlike the original KS-9 Silent, the 2.0 version comes pre-lubed, and its nylon bottom housing helps keep the remaining sound low.
- Pro: Factory pre-lube and dual dampening pads in a proven Gateron design.
- Pro: 5-pin construction gives good stem stability in hot-swap sockets.
- Con: The dampened bottom-out feels soft, which typists who like a crisp landing may not enjoy.
Skip these if you prefer a heavier, more deliberate keystroke for precise typing.
EPOMAKER Nude Rosa
The best switch-only option in this list if your search intent is a purpose-built lubed linear switch designed specifically for quiet typing. These are factory pre-lubed 5-pin silent linear switches that deliver smooth, bump-free travel with minimal noise. They are the pick for people who want the cleanest result for the least effort.
- Pro: The linear profile and silent dampers are engineered together, so the noise reduction does not compromise travel smoothness.
- Pro: 5-pin MX compatibility means these fit the vast majority of hot-swap boards on the market.
- Con: Only thirty-five pieces per pack, which means a full keyboard build requires multiple purchases.
Skip this only if your budget will not stretch to buying multiple packs for a full-size layout.
Akko V3 Fairy Silent Linear
If Akko’s popular V3 Penguin appeals to you but its tactile bump does not, the V3 Fairy is the obvious fix. It comes from the same Akko V3 silent family, so it shares the standard MX-style stem, the 5-pin housing and the factory pre-lube, but the stem is a true linear with no bump anywhere in the stroke. Akko rates it at roughly 50gf of operating force, and silicone dampening on the stem softens both the bottom-out and the return, which is what keeps the clack and the top-out tick out of the room.
This is the switch for people who want a budget-tier silent linear from a brand with a long track record in the hobby. It drops into nearly any hot-swap board with 5-pin sockets, including the Redragon K689 and the DarkBeacon Blade87 covered earlier, and it pairs well with thicker PBT keycaps for a soft, muted sound profile.
Strengths:
- Genuinely linear travel, which fits the brief of this guide better than tactile silent switches.
- Consistent factory lubrication from switch to switch, which matters when you are installing a full board in one sitting.
- The 50gf spring sits in a comfortable middle ground for long writing sessions: light enough to avoid finger fatigue, firm enough to limit accidental presses.
Drawbacks:
- Like most silent linears, the bottom-out has a cushioned feel that some typists describe as soft. If you want a crisp, hard landing, a non-silent but deep-sounding linear may suit you better.
- Sold in small packs, so a full-size build means buying several.
Compared with the EPOMAKER Nude Rosa, the Fairy is a very close alternative in purpose and price tier. Choose the Fairy if you prefer Akko’s housing and spring tuning, and the Nude Rosa if you want EPOMAKER’s take on the same idea. Either is a strong fit for quiet linear typing in any 5-pin hot-swap board.
Keychron Silent K Pro White
Keychron’s Silent K Pro White targets people who want a very light silent linear in a bulk pack. Keychron lists it at 38gf of operating force, about 2mm of pre-travel and 4mm of total travel, with a POM and TPE double-shot stem that builds the damping straight into the stem rather than relying only on separate pads. Each set includes 110 switches plus a holder, which is enough for a full-size board with spares left over.
That pack size is the main reason this pick stands out. Many silent switch kits on this list ship in packs of 35 to 45, so a full 104-key build becomes a multi-pack purchase. The Keychron set covers it in one go and keeps every switch from the same production batch, which helps consistency.
Strengths:
- 110 factory-lubed switches in one set, enough for full-size layouts.
- Very light 38gf spring that suits fast, low-effort typing and long transcription sessions.
- SMD LED compatible housing with a transparent top, so backlighting still shows through.
Drawbacks:
- These are 3-pin switches. They fit both plate-mounted and 5-pin hot-swap boards, but they can wobble slightly more than 5-pin switches in a socket without a plate.
- The light spring is easy to bottom out and easy to trigger by accident if you rest your fingers heavily on the keys.
Against the Akko Fairy, the Keychron White is noticeably lighter and comes in a far larger pack. If you type with a heavy hand, the Fairy or the Gateron Oil King below will feel more controlled. If you want effortless, quiet keystrokes across an entire board without buying three or four packs, this is the most convenient choice in the guide.
KiiBOOM Mossy Silent Linear
The KiiBOOM Mossy is a newer silent linear that ships in a 100-piece set, making it another strong option for full builds. KiiBOOM rates it at 37gf actuation and 43gf bottom-out, with 2.0mm of pre-travel and about 3.5mm of total travel. The stem is POM, the housing is PC, and the stem is lubed at the factory to remove scratchiness from the first keystroke. It is a 5-pin switch with a built-in light diffuser for RGB boards.
The narrow gap between actuation and bottom-out force gives the Mossy a smooth, even feel through the stroke. It is a good fit for people who type for hours and want a light switch without a dramatic ramp-up at the end of travel.
Strengths:
- 100 switches per set, enough for layouts up to a full-size board with one pack.
- Very light and even force curve that reduces fatigue over long sessions.
- 5-pin housing for better stability in hot-swap sockets than 3-pin alternatives.
Drawbacks:
- Independent write-ups note some stem wobble, which you may notice on wider keys or with tall keycap profiles.
- As with most silent linears, the bottom-out is soft, so people who dislike dampened switches will find it cushioned.
The Mossy sits between the Keychron White and the Akko Fairy. It matches the Keychron’s light feel and large pack size but uses a 5-pin housing, and it is lighter than the Fairy. If you are filling a large RGB board and want a budget-tier silent linear that does not need a second pack, it is one of the most practical picks here.
Outemu Honey Peach V3 Silent Linear
Outemu’s silent linears are some of the most affordable quiet switches available, and the Honey Peach V3 is the current version of the brand’s popular Peach line. It is a pre-lubed, 5-pin silent linear with a light 40gf spring, sold in larger packs aimed at people filling an entire board on a tight budget.
This is the switch to consider if you like Outemu’s value but need true linear travel instead of a tactile bump. Since the brand’s Pomelo is tactile, the Honey Peach V3 is the closer match to what most readers searching for quiet linear switches actually want.
Strengths:
- One of the lowest cost-per-switch options among silent linears, which matters for full-size layouts.
- Light 40gf spring that suits fast, low-effort typing.
- Factory lube and a 5-pin housing, so it installs cleanly in common hot-swap boards.
Drawbacks:
- Reviewers commonly describe the dampening as a little squishy at the bottom of travel compared with pricier silent linears.
- Budget switches tend to show more variation in smoothness from one switch to the next than premium options, so sorting through a pack before installing is worthwhile.
Compared with the Akko Fairy and EPOMAKER Nude Rosa, the Honey Peach V3 gives up some refinement in exchange for lower cost and a lighter spring. For a first quiet build, an office board or a budget experiment, that trade is usually worth it.
MELETRIX WS White Silent Linear
The WS switch series comes from Wuque Studio, a respected name in the custom keyboard scene, and MELETRIX sells it in 35-piece packs. The WS White is the silent linear in the lineup. Its spec sheet lists nylon top and bottom housings, a POM stem, a single-stage 15mm spring with a 63.5g bottom-out force, 3.5mm of total travel, a 5-pin PCB mount and factory lube. The listing describes it as roughly 45gf at actuation.
Nylon housings tend to produce a deeper, softer sound than polycarbonate, and that pairs well with silent damping. The result is a switch that is quiet but still has a slightly fuller sound signature than the thinnest-sounding budget silents.
Strengths:
- Nylon housing helps keep whatever sound remains low-pitched rather than clacky.
- The firmer bottom-out force gives more resistance at the end of the stroke, which helps heavy typists avoid slamming into the plate.
- Standard MX-style structure for wide compatibility with plate-mounted and hot-swap boards.
Drawbacks:
- 35 switches per pack, the same multi-pack issue as the Nude Rosa and Akko options.
- Sits a tier above the Outemu and KiiBOOM options for cost per switch.
The WS White is the best choice in this guide for people who find very light silent linears too floaty. It is more controlled than the Keychron White or KiiBOOM Mossy, making it a good mid-range upgrade for a board that already has a decent case and stabilizers.
Gateron Oil King Linear
Not every quiet build needs a silent switch. The Gateron Oil King is a factory-lubed, 5-pin linear that is not damped, but it is well known in the hobby for a deep, muted sound and very smooth travel. It uses a 55gf actuation force with roughly 4mm of total travel, a long spring and a generous factory lube that removes most scratchiness and spring noise.
It belongs in this guide because many typists dislike the cushioned bottom-out of silent switches. A well-lubed, deep-sounding linear in a dampened case can be quiet enough for a home office while keeping a clean, firm landing. It is the honest alternative for people who want to reduce noise without giving up feel.
Strengths:
- Generous factory lube makes it one of the smoothest linears in its tier straight out of the pack.
- Firm, crisp bottom-out with no mushiness, which many fast typists prefer.
- Gateron’s quality control is generally consistent from switch to switch.
Drawbacks:
- It is not a silent switch, so it will always be louder than any damped option here, especially on a hard plate or with thin keycaps.
- The 55gf spring is heavier than most picks on this list, which some people find tiring over very long sessions.
Choose the Oil King over the Nude Rosa or Akko Fairy only if you have tried silent switches and disliked the feel. Pair it with a gasket-mount board like the DarkBeacon Blade87, foam dampening and thick PBT keycaps, and the overall sound stays low and muted rather than clacky.
Buying Guide
Understand what factory pre-lube actually does and does not fix
Factory pre-lube is applied in thin coats on the stem rails at the manufacturing plant. It smooths initial scratchiness, but it rarely covers the spring or the housing interior completely. For a switch to stay quiet and smooth over months of use, you need thicker, more evenly distributed lube — or a switch with a pre-installed spring damper in addition to stem lubrication. When a product claims pre-lubed, check whether the description specifies spring damping too.
Match the pin count to your board’s sockets
Three-pin switches fit both plate-mounted and socketed hot-swap boards. Five-pin switches require socketed boards or a plate with open stems. Buying five-pin switches for a plate-mounted board means snapping off the extra legs by hand, which is a fussy modding task that can cause stem wobble if done carelessly. Check your board’s socket type before buying any switch pack, especially if you are buying in bulk.
Know the difference between silent and linear
A silent switch has dampers that reduce bottom-out and top-out noise. A linear switch has no tactile bump on the downstroke. The best result for quiet typing comes from combining both properties, as the EPOMAKER Nude Rosa does. A silent tactile switch like the Akko V3 Penguin will be quiet but will still have a bump on the downstroke, which some people find distracting during fast prose typing.
Pick a spring weight that matches how you type
Spring weight has as much effect on noise as damping does. Light springs in the 35gf to 40gf range, like the Keychron Silent K Pro White and KiiBOOM Mossy, need very little effort, but they are easy to bottom out hard, so you hear more of the landing. Medium springs around 45gf to 50gf, like the Akko V3 Fairy and MELETRIX WS White, give enough resistance to slow your finger before it reaches the bottom. Heavier springs of 55gf and up, like the Gateron Oil King, suit heavy-handed typists who would otherwise slam every key. A good rule: if you rest your fingers on the keys while thinking, avoid the lightest springs, because you will trigger stray characters.
Housing material shapes what sound is left
Even a well-damped switch makes some noise, and the housing decides its character. Polycarbonate tops tend to sound brighter and suit RGB boards because they let light through. Nylon housings, used on the WS White, produce a deeper, softer tone. POM stems glide smoothly and resist wear. For the quietest result, think of housing material as a tone control: it will not make a switch dramatically louder or quieter, but it decides whether the remaining sound is high-pitched and clacky or low and muted.
The board matters as much as the switch
Silent switches in a hollow, plastic case will still sound louder than they should. Before blaming a switch, check three things on the board. First, a gasket mount or foam-filled case, like the DarkBeacon Blade87, absorbs vibration that otherwise echoes. Second, stabilizers on the space bar, Enter, Shift and Backspace are often the loudest keys on any board, and a dab of dielectric grease or a band-aid mod on the PCB can quiet them. Third, keycap material changes sound: thick PBT keycaps sound deeper than thin ABS ones, and taller profiles add a little more muffling.
Comparison of the additional picks
| Switch | Type | Spring feel | Pins | Pack size | Price tier |
|---|---|---|---|---|---|
| Akko V3 Fairy | Silent linear | Medium (about 50gf) | 5-pin | Small pack | Budget |
| Keychron Silent K Pro White | Silent linear | Very light (38gf) | 3-pin | 110 pieces | Mid-range |
| KiiBOOM Mossy | Silent linear | Very light (37gf) | 5-pin | 100 pieces | Mid-range |
| Outemu Honey Peach V3 | Silent linear | Light (40gf) | 5-pin | Large pack | Budget |
| MELETRIX WS White | Silent linear | Medium (about 45gf) | 5-pin | 35 pieces | Mid-range |
| Gateron Oil King | Lubed linear, not damped | Medium-heavy (55gf) | 5-pin | 35 pieces | Mid-range |
How to install new switches without damaging your board
- Unplug the keyboard, then remove keycaps with a wire keycap puller, working row by row so you can put them back in the right place.
- Use a switch puller to squeeze the top and bottom clips of each switch at the same time and lift straight up. Rocking the switch sideways can loosen the hot-swap socket.
- Before inserting each new switch, look at the pins. If one is bent, straighten it gently with tweezers. A bent pin is the most common reason a key stops working after a swap.
- Line the switch up with the socket and press straight down until the clips click into the plate. Support the back of the PCB with your other hand if the board flexes.
- Plug the board back in and check every key in a key-tester page or a plain text editor before refitting all the keycaps.
Simple ways to make any board quieter
- Use a desk mat. A thick cloth mat under the keyboard stops the desk from acting like a sounding board.
- Add O-rings only as a last resort. They shorten travel and make most switches feel mushy, so a proper silent switch usually gives a better result.
- Type lighter. Silent linears reward a lighter touch, and you do not need to press all the way down to register a keystroke.
- Check for spring ping after installation. If a few switches still ping, a tiny amount of thin oil on the spring fixes it, though most factory-lubed silents above do not need it.
Switch pack or complete keyboard: which route fits you
This guide mixes switch packs with complete keyboards because readers arrive from two different starting points. Working out which one you are makes the choice much easier.
Buy a switch pack if you already own a hot-swap mechanical keyboard and only the noise bothers you. Swapping in silent linears is the cheapest and most effective upgrade available, and it keeps the case, keycaps and layout you already like. Count your keys first: a 60% board needs about 61 switches, a 75% around 84, a TKL 87 and a full-size board 104 or more. Then decide whether one large set, like the Keychron or KiiBOOM options, or several smaller packs works out better.
Buy a hot-swap board plus switches if your current keyboard is soldered or membrane. A board like the Redragon K689 gives you sockets to build on, and you can drop in any 5-pin silent linear from this guide on day one. This route costs more up front but lets you change the sound and feel later without buying a new keyboard.
Buy a complete quiet board if you want a finished product with no tools. The DarkBeacon Blade87 ships with silent switches already installed, and low-profile scissor keyboards skip mechanical switches entirely if you want the simplest quiet option. These are the right choices for offices, shared rooms and anyone who sees switch swapping as a chore rather than a hobby.
One more check before you order switches: confirm your board’s sockets accept MX-style switches and whether they are 3-pin or 5-pin. A few compact and low-profile keyboards use proprietary or low-profile sockets that standard switches will not fit, and no amount of clipping or adjusting will make them work.
Our Verdict
The DarkBeacon Blade87 is the top pick for most people chasing quiet typing, because it ships as a complete gasket-mounted, hot-swap TKL with silent switches already installed, at a budget price. If you already own a hot-swap board and only want switches, the EPOMAKER Nude Rosa is the best dedicated lubed silent linear here, delivering a clean, low-noise result with zero work beyond installation. If you want a silent linear from the brand that created the MX standard, the Cherry MX2A Silent Red is the safest choice.
FAQ
Do lubed linear switches sound significantly quieter than unlubed ones?
Lubrication removes the high-frequency scratch and spring ping that make mechanical switches sound harsh. Combined with a silent damper, a well-lubed linear can be quiet enough to share a room without disturbing anyone nearby. The improvement over stock unlubed switches is immediately noticeable in any side-by-side comparison.
Can I lube my own switches instead of buying factory pre-lubed ones?
Yes, and many enthusiasts prefer it because hand-lubing gives you control over lube thickness and coverage. However, it is a tedious process that can take an hour or more per board and introduces inconsistency if you are new to it. Factory pre-lubed options eliminate that variable and get you typing within minutes.
Will silent switches feel mushy or slow?
Early silent switches were noticeably softer at the bottom of travel, which gave them a bad reputation. Modern silent linear dampers like the ones in the EPOMAKER Nude Rosa provide noise reduction without introducing a mushy bottom-out. The travel distance and spring weight remain the primary drivers of perceived speed.
How many switches do I need for a full keyboard build?
A standard 104-key board needs 104 switches. A 75% layout needs roughly 84, and a TKL needs 87. Packs of 35 or 45 switches cover only a portion of most layouts, so plan for multiple packs or a bulk listing when you are doing a full build.
Are silent linear switches good for gaming?
Yes, for most players. A silent linear has the same smooth, bump-free stroke as a standard linear, so rapid repeated presses and held movement keys work just as well. The main difference is a slightly cushioned bottom-out. Competitive players who rely on a hard, crisp landing may prefer a lubed non-silent linear like the Gateron Oil King, but for casual gaming and streaming with a microphone nearby, a silent linear is a sensible choice.
Can I mix 3-pin and 5-pin switches on the same board?
On a 5-pin hot-swap board, you can install either type, since a 3-pin switch simply leaves the two extra holes empty. On a 3-pin-only board, 5-pin switches need their two plastic legs clipped off first. Mixing types across keys is fine electrically, but 3-pin switches may wobble a little more in plateless or flexible builds.
How long do factory-lubed silent switches last?
Manufacturers commonly rate the switch mechanism for tens of millions of keystrokes, which is far longer than most people keep a keyboard. What changes sooner is the feel: factory lube can thin out and dampers can soften over years of heavy use. If a board starts to sound scratchy or ping, hot-swap sockets make it easy to replace only the worst keys or refresh the whole set.
Do I need to lube factory pre-lubed switches again?
Usually not. Most pre-lubed silent linears are ready to use. Hand-lubing again is optional and mostly appeals to enthusiasts chasing a very specific sound. Lubing the stabilizers on larger keys often makes a bigger difference to overall noise than re-lubing the switches themselves.
What is the quietest keyboard setup for a shared room?
Combine a silent linear switch with a gasket-mount or foam-filled board, well-lubed stabilizers, thick PBT keycaps and a desk mat. That combination keeps typing quiet enough for shared offices, late-night sessions and voice calls. If you need even less noise and do not care about mechanical feel, a low-profile scissor keyboard is quieter still.
